Click to enlarge
Click to enlarge
Qty:

ADD750 COP Ignition Coil Tester ADD750 Coil On Plug Spark Tester

by Auto Parts INSTRUMENT  SKU: Gsunlight00411
Price: $69.99
History: 31 sold
Model:
  • Gsunlight00411
  • Weight:
  • 0.5 KG
  • Availability: In stock
    Payment:
    Best Deals
    Clearance Sale
    Related Items
    Product Description
    Customers' Reviews
    FAQ
    ADD750 COP Ignition Coil Tester is also called COP Ignition Quickly Tester ADD750. ADD750 Coil On Plug Spark Tester can quickly check the individual ignition coils on a cylinder. ADD750 Coil On Plug COP Ignition System Quick Tester support Quickly diagnoses faulty ignition coils.

    ADD750 COP Ignition Coil Tester ADD750 Coil On Plug Spark Tester

    COP Ignition Quickly Tester ADD750 Coil On Plug COP Ignition System Quick Tester ADD750 Ignition Tester


    Coil On Plug COP Quick Ignition Coil tester ADD750 for quick checking on ignition coil / measures voltage and arc duration / option to adjust sensitivity / optical and acoustic signal

    ADD750 Coil On Plug COP Ignition System Quick Tester User Manual



    The ADD750 Coil On Plug (COP) Quick Ignition tester is a battery-operated, hand-held quick tester designed to easily and quickly determine if a COP is producing a proper spark for the spark plug.

    ADD750 COP Ignition Coil Tester works by receiving a signal from the secondary ignition coil and determines if the COP is producing the correct amount of voltage and arc duration. If the voltage is correct, the tester beeps and the red LED light flashes; if the arc duration is correct the green LED will also flash.

    Assembling:

    1.  Attach the extension probe onto the tester.
    2.  Press fit the probe tip onto the extension probe.



    FEATURES:


    Quickly diagnoses faulty ignition coils
    Adjustable sensitivity
    Auto power off

    SPECIFICATIONS:


    Probe length including end sensor 200mm
    Powered by CR2032 battery supplied
    Handset 130L  x 55H x 22W mm

    RED LIGHT - Spark

    Consistent, steady flashing and beeping indicates the COP is producing the correct voltage.

    GREEN LIGHT - Arc

    Consistent and steady flashing indicates the arc duration is correct.

    NO LIGHT OR INCONSISTENT RESPONSE

    Indicates the COP is NOT producing the correct voltage. This may be caused by the following:

    1. Fouled spark plug, or incorrect gap
    2. Damaged or corroded wires or connectors
    3. Faulty coil or PCM

    How to Operate ADD750 Coil On Plug COP Ignition System Quick Tester:

    1.Turn on the tester by firmly tapping the handle of the tester on a hard surface. To indicate the tester is on, the red and green LEDs rapidly flash alternately, and the tester emits an ascending beeping sound for a short period. Afterwards, until the tester turns off, the green LED continues to slowly flash to indicate the tester is on.

    Note: Firmly lapping the handle while the testers turned on initiates a self-test, in which the both LEDs flash simultaneously and the tester beeps for a short period.

    2. With the engine running, firmly place the tester's signal receiver pad against the COP's body. Make sure the marked side of the pad is towards the COE,you can adjust sensitivity switch untill the red and green LED flash on simultaneously

    (1).Because the tester relies on a signal emitted from the COP body, it may be necessary to move the signal receiver pad around until the pad is in a position to pick up the strongest signal.

    (2).Because the strength of ignition signal that every car  produce are different so you need to adjust sensitivity switch when you retest a car untill the red and green LED flash on simultaneously.

    (3).It is possible that a misfire may not

          Develop while the engine is operating at

          low-speed, so it may be necessary to test

          the COP with the engine heated, under

          load, or brake torque (increased RPMs)

    On DIS vehicles, the wasted spark may cause a doubling of the spark detection. To avoid this and only detect the true spark, slightly move the probe tip away from the ignition cable.

    If the tester resets or changes mode during testing, the spark plug may not be firing and the high voltage is approaching the coil's maximum output voltage.

    Quick Check Mode:
    To enter the Quick Check Mode, simply turn the tester on. The tester automatically enters this mode when it is powered on.

    During this mode, the red and green LEDs alternately flash once every second until a spark is detected.

    Once a spark is detected, the Red LED light flashes and the red or the green LED lights to show the polarity.

    Notes:
    1.If the tester does not detect a spark after 30 seconds, it automatically turns off.
    2.The Quick Check Mode may not detect spark voltage less than 5 kV. Use the Measurement Mode to verify.
     
    Green LED light
    Consistent and steady flashing indicates the duration of the arc is correct.
    No response or an inconsistent response indicates the duration of the arc is NOT correct.
    This maybe caused by one of the following:
    (1) Shorted windings inside the coil
    (2) Resistance or bad connections in the primary / secondary connections
    (3) Faulty coil

    Please refer to the vehicle's shop manual for instructions on troubleshooting and repairing/replacing defective COPs.

    Turning the Tester Off
    The tester automatically turns off after approximately 2 minutes of non-use. Before shutting off, both LEDs flash and the tester emits a descending beeping sound for a short period.

    Maintenance
    Replacing the Battery

    The Coil On Plug (COP) Quick Ignition Quick tester uses a 3-volt CR2032 lithium battery.
    1.  Remove the two screws from the handle.
    2.  Carefully separate the handle and remove the old battery.
    3.  Place the new battery in the handle, positive (+) side facing up.
    4.  Reassemble and tighten the screws.

    The Signal Receiver Pad
    It is recommended to visually inspect the signal receiver pad for any cracks or tears before every use. If damaged, replace the pad.

    The Red and Green LEDs
    The LEDs on the tester are not replaceable.

    Package Content:


    • ADDTOOL ADD750 COP Ignition Tester.

     

     

    Contacts:



    Website: www.obd2tuner.com
    Skype: OBD2Tuner.com
    Email: info@obd2tuner.com
    What;s app: +86 15889512468

     

     

     

     

     

    Gsunlight.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

    Contact information:


    Website: www.gsunlight.com
    Email: gsunlight@outlook.com
    Skype: gsunlight@outlook.com
    Whatsapp: +86-13691674080
     

     



    Copyright (c) 2018 gsunlight.